» Coffin-assembly press – conical coffin-shape KPO/KPU
(for coffin top KPO, for coffin bottom KPU)
With a large number of pieces, you need a coffin-assembly press for the coffin top and a coffin-assembly press for the coffin bottom.
2 persons can assemble up to 140 coffins per shift. With serial production, even more is possible!
– Universally applicable on all models
– Toolless model change in best time
– Can be used on various types of corner joint
– Middle centering of the head and foot part
– High locking pressure level on all corners
– Bottom base or top lid assembly possible
– 200° rotatable
Working time savings:
– The next parts can be prepared or glued during the automatic lift-out
– no heavy parts to lift for the personnel
– Diagonal dimensions are identical
– Precise finishing of all angles
– Less or no planing required
KPO
Side part length: 1.730 mm – 2.150 mm
Head part length: 480 mm – 730 mm
Foot part length: 480 mm – 730 mm
Coffin height: 185 mm – 375 mm
Rotation: 0° – 200°
KPU
Side part length: 1.730 mm – 2.150 mm
Head part length: 550 mm – 800 mm
Foot part length: 550 mm – 800 mm
Coffin height: 185 mm – 375 mm
Rotation: 0° – 200°
»Coffin-assembly press combined – conical coffin-shape KPO-KPU
(for coffin top KPO and coffin bottom KPU)
With the combined coffin-assembly press, it is possible to assemble the coffin top and coffin bottom on one machine.
1 person can assemble up to 60 coffins per shift!
– Universally applicable on all models
– Toolless model change in best time
– Can be used on various types of corner joint
– Middle centering of the head and foot part
– High locking pressure level on all corners
– Bottom base or top lid assembly possible
– 200° rotatable
Working time savings:
– The next parts can be prepared or glued during the automatic lift-out
– no heavy parts to lift for the personnel
– Diagonal dimensions are identical
– Precise finishing of all angles
– Less or no planing required
KPO
Side part length: 1.730 mm – 2.150 mm
Head part length: 480 mm – 730 mm
Foot part length: 480 mm – 730 mm
Coffin height: 185 mm – 375 mm
Rotation: 0° – 200°
KPU
Side part length: 1.730 mm – 2.150 mm
Head part length: 550 mm – 800 mm
Foot part length: 550 mm – 800 mm
Coffin height: 185 mm – 375 mm
Rotation: 0° – 200°
» Coffin-assembly press – trapezoidal coffin-shape KPO-F/KPU-F
(for coffin top KPO-F, for coffin bottom KPU-F)
2 persons can assemble up to 80 coffins per shift with both coffin-assembly presses and an automatic lift-out device.
– Universally applicable on all models
– Toolless model change in best time
– Can be used on various types of corner joint
– Precise centered component linkage
– High locking pressure level on all corners
– Bottom base or top lid assembly possible
– 200° rotatable
Working time savings:
– The next parts can be prepared or glued during the automatic lift-out
– no heavy parts to lift for the personnel
– Diagonal dimensions are identical
– Precise finishing of all angles
– Less or no planing required
KPO-F
Total length: 1.650 mm – 2.160 mm
Length: long side part 1.250 mm – 1.600 mm
Length: short side part 400 mm – 560 mm
Width: head part 300 mm – 600 mm
Width: foot part: 300 mm – 600 mm
Width: centre 550 mm – 730 mm
Coffin height: 90 mm – 300 mm
Rotation: 0° – 200°
KPU-F
Total length: 1.600 mm – 2.110 mm
Length: long side part 1.200 mm – 1.550 mm
Length: short side part 400 mm – 560 mm
Width: head part 300 mm – 600 mm
Width: foot part: 300 mm – 600 mm
Width: centre 550 mm – 730 mm
Coffin height: 200 mm – 400 mm
Rotation: 0° – 200°